Short answer. If you are spending more than a few thousand dollars on a boat, BoatUS says to hire a marine surveyor. A condition and valuation (C&V) survey, sometimes called a prepurchase survey, is a written snapshot of the boat's condition and value on a specific day. A proper C&V requires the boat to be hauled so the hull and underwater gear can be inspected. The report should evaluate the boat against U.S. Coast Guard regulations and against ABYC and National Fire Protection Association standards. Do not rely on a survey prepared for a previous owner, even a recent one: the boat could have been grounded or otherwise damaged since.[1]
This page is a buyer's checklist for a 30-90 ft boat, drawn from BoatUS and ABYC. It is not a survey. BoatUS's preliminary evaluation checklist is not a substitute for inspections by a competent marine surveyor and a marine engine mechanic.[1][2][4] Yacht Masters Hub does not know what any surveyor charges, and this page does not quote fees.
1. Hire the right surveyor, yourself
- You hire the surveyor, not the seller or broker. BoatUS says never to hire a surveyor referred by the seller or broker. The surveyor should have no affiliation with brokers, dealers or repair shops whose living depends on the sale or repair of that boat.[1] ABYC says your yacht broker can't ethically recommend a surveyor to you.[2]
- Look for professional credentials. Marine surveyors are not regulated or licensed, BoatUS and ABYC both note, so almost anyone can use the title. A good indicator is affiliation with ABYC plus membership in either the National Association of Marine Surveyors (NAMS) or the Society of Accredited Marine Surveyors (SAMS). ABYC adds that many insurers and banks require a NAMS or SAMS credential, and that you should confirm those requirements before you hire.[1][2]
- Match the surveyor to the boat. Choose someone familiar with power or sail, and with the construction (fiberglass, wood or metal) you are buying.[1]
- Put survey, sea trial, financing and insurance contingencies in the contract. BoatUS says a written sales contract should spell out that the sale hinges on a satisfactory survey and sea trial and on the ability to obtain acceptable financing and marine insurance, and that the boat is free of liens.[1]
Find a surveyor through NAMS or SAMS, and confirm they are an ABYC member.
2. Know which surveys you need
ABYC and BoatUS describe several kinds of surveys. They are not interchangeable.[1][2]
| Survey | What it is for | Notes |
|---|---|---|
| Prepurchase / C&V | A comprehensive condition and valuation when you are thinking of buying | ABYC: often includes operational testing of all systems and equipment, and a sea trial. Its primary purpose is to give the buyer the information needed for an informed decision; it may also satisfy insurer and lender requirements.[2] BoatUS: usually required for insurance and financing; you should get one whether they require it or not.[1] |
| Limited insurance C&V | Often done only for insurance | ABYC: each insurer has its own age/size and report requirements. This report is not sufficient for a purchase decision.[2] |
| Engine survey | Operation and condition of propulsion and generator engines | Typically includes controls, electrical, cooling and exhaust systems, engine mounts, compression, engine and exhaust temperatures, and oil samples. BoatUS, quoting surveyor Alison Mazon: warranted for particularly expensive or complex engines, and for engines with an obvious lack of maintenance. Many larger engines built since about 2006 have computers that a trained technician can scan.[1] |
| Rigging survey (sail) | Mast, boom, standing and running rigging, attachment points, welds, mast step | Red flags BoatUS lists: a rig more than 10 years old, frayed stays, cracked swages, weeping chainplates, and turnbuckles that are bottomed out. Also survey the rig if the boat will be used offshore or heavily raced.[1] |
| Appraisal or damage surveys | Financing, estate or divorce, donation, or insurance claims | ABYC describes these separately from a prepurchase C&V.[2] |
On a 30-90 ft motor yacht, start with a prepurchase C&V. BoatUS, quoting surveyor Alison Mazon, says a separate engine survey is warranted for particularly expensive or complex engines, and for engines with an obvious lack of maintenance, and that many larger engines built since about 2006 have computers that a trained technician can scan.[1]
3. What a proper C&V inspects
BoatUS says a good surveyor inspects the boat top to bottom, fore and aft, and will:[1]
- Look at the hull and deck, and use hammer sounding and a moisture meter to find voids or delamination, and core that may rot and go soft before a buyer can feel it.
- Check AC and DC electrical systems, plumbing and thru-hull fittings, deck hardware, propane and fuel systems, steering and controls, and safety equipment.
- Produce an in-depth written report.
ABYC says a C&V report should be clear and concise, and should:[2]
- Identify unique markings: name, hailing port, hull identification number (HIN), and federal or state registration numbers.
- Give published dimensions and describe construction.
- Detail construction and installed equipment to the degree the purpose of the survey requires.
- Remark on the condition of the vessel and its systems, in general and in detail.
- Provide recommendations for repairs or corrections needed to make the vessel function properly and safely.
- Include photographs from several angles, plus the HIN and registration numbers, and photos of notable improvements or deficiencies.
- Include the vessel's current fair market value, and possibly its replacement value.
After reading the report, ABYC says you should have a pretty good idea of overall condition and of what needs to be done to make the vessel functional and safe. If you do not understand something, call the surveyor and have them explain.[2]
4. Attend the survey and the sea trial
BoatUS says a good surveyor welcomes the buyer at the survey. Watching a professional go through the boat is the best way to learn it. Notes will mean more if you can talk through what is being examined, and the surveyor can answer questions that may not rise to the written report, including problems they have seen on similar boats.[1]
ABYC says a prepurchase C&V often includes a sea trial.[2]
5. What the recommendations mean
BoatUS describes recommendations, often grouped as A, B or C:[1]
- A-list ("must-dos"). Issues that, left alone, can cause the boat to sink, burn, be in an accident, or seriously injure someone. Insurers will usually require these to be addressed before the boat is used. Examples BoatUS gives: worn or damaged below-waterline hoses, seacocks and thru-hulls; AC or DC wiring deficiencies that could cause a fire; missing or non-functioning USCG-required equipment (fire extinguishers, flares, navigation lights); propane-system deficiencies; a vessel with too much horsepower for stability; no operable carbon-monoxide alarms; unsecured batteries or fuel tanks; missing oil-spill or waste-management placards.
- B-list. Not an immediate risk, but a hazard if left too long, or items that improve safety, value and enjoyment. Examples: hoses and wires that are chafing or not installed to ABYC standards; worn cutlass or rudder bearings; stiff or corroded steering or control cables; engine maintenance needed to forestall a larger problem; cleats or stanchions that need re-bedding; heavy corrosion on fuel or water tanks. Some of these may still be required by underwriters.
- C-list. Normal upkeep, to be done as you can: leaking ports or hatches, anodes due for replacement, loose or worn belts, hoses and engine mounts, cosmetics, winches that need service.
BoatUS also notes that surveyors inspect against industry standards such as ABYC's, while recognizing that newer standards were not in place when older boats were built, but that some items, such as carbon-monoxide alarms or proper wiring, are important enough that underwriters may still require them.[1]
Any purchase contract should let the buyer walk away if the survey is unacceptable. A seller may agree to do required repairs before closing; have those items re-inspected before the sale is finalized. Surveyors will often reinspect specific items for a fee and sign off that the work was done properly.[1]
6. Safety equipment the survey (and the U.S. Coast Guard) will care about
A prepurchase survey should check safety equipment.[1] Federal carriage rules are minimums; they do not guarantee safety, and state rules may be stricter. From the U.S. Coast Guard's November 2023 Boater's Guide:[3]
- Life jackets. One wearable, U.S. Coast Guard-approved PFD for each person on board, in good and serviceable condition, the right size, and readily accessible. Boats 16 feet and longer (except canoes and kayaks) also need one throwable PFD, immediately available. On a vessel underway, children under 13 must wear an appropriate approved life jacket unless they are below deck or in an enclosed cabin, unless a state's rule is different on waters subject to that state.
- Fire extinguishers. Required when listed fire hazards exist (including permanently installed fuel tanks and certain closed compartments). They must be U.S. Coast Guard-approved marine Class B extinguishers, with a mounting bracket. The required count depends on boat length, model year, and whether a fixed engine-compartment system is installed. Non-rechargeable extinguishers expire 12 years from the date stamped on the bottom. Inspect seals, gauges, damage and weight.
- Engine cut-off switch. Federal law requires the operator of vessels less than 26 feet to use the installed engine cut-off switch link while operating on plane or above displacement speed (the requirement is described as in effect as of 1 April 2021).
- Visual distress signals. Required on U.S. coastal waters, the Great Lakes, territorial seas, and connected waters up to where the waterway is less than two nautical miles wide. Pyrotechnic signals expire 42 months after manufacture. Expired signals may be carried as extras but do not count toward the requirement.
- Navigation lights, sound-producing devices, ventilation (gasoline), backfire flame control (gasoline inboards), and, where they apply, oil-discharge and garbage placards and a marine sanitation device. Vessels 26 feet and greater with machinery spaces must display a durable oil-discharge placard. Recreational boats with an installed toilet must have an operable, certified MSD; in a No Discharge Zone the device must be secured so it cannot discharge.
Related: life raft servicing, MSD and holding tanks, EPIRB registration, VHF, DSC and MMSI, ABYC thru-hull bonding, fire suppression.
7. A walk-through you can do before you hire (not a survey)
BoatUS publishes a preliminary buyer's evaluation checklist for a first look: cleanliness, rust, hull blisters, peeling paint or varnish, previous repairs, cracks or corrosion, and a check of operating gear such as winches, steering, lights, and the head, and says it is not a substitute for inspections by a competent marine surveyor and a marine engine mechanic.[4] Use it only to decide whether the boat is worth a survey:
- Hull, deck, hull-to-deck joint, hardware, hatches, portlights, windshield.
- Engine, steering, shifting, propeller, batteries, wiring, bilge pumps, fuel tanks, gauges and seacocks.
- Head, holding tank, lighting and the bilge.
BoatUS suggests you may want to keep shopping if a 1-to-5 scoring of those areas produces more than 10 scores of 2 or under.[4] If you go ahead, take your notes to the surveyor.
8. After the sale
BoatUS's after-the-sale list includes: matching the HIN to the seller's records; searching title and registration, or, for a documented vessel, checking with the Coast Guard National Vessel Documentation Center (800-799-8362) for recorded liens; titling and registration or documentation; trailer title and registration where required; and insurance, which a lender or marina may require.[1]
Questions
- Is a recent survey for the current owner good enough?
- No. BoatUS says not to rely on a survey prepared for a previous owner, even if it was done recently. The boat could have run aground or suffered other unnoticed damage since.[1]
- Does a proper survey require a haul-out?
- Yes. BoatUS says a proper C&V survey requires the boat to be hauled so the hull and underwater gear can be inspected.[1]
- Do I always need a separate engine survey?
- Not always, but often on this size of boat. BoatUS says an engine survey is warranted for particularly expensive or complex engines, and for engines with an obvious lack of maintenance, and that many larger engines built since about 2006 can be scanned for computer faults.[1]
- Can I use an insurance survey to decide whether to buy?
- ABYC says a limited insurance C&V is not sufficient to make an informed purchase decision.[2] Get a prepurchase C&V.
- Who should I hire?
- BoatUS and ABYC say to look for a surveyor with ABYC involvement and a NAMS or SAMS credential, who knows your type of boat, and whom you hired yourself, not someone the seller or broker referred.[1][2]
Sources
- BoatUS, Boat Buyers Guide, imprint TS061 3/19. https://www.boatus.com/assets/pdf/boat-buyers-guide.pdf (opened 16 Nov 2026).
- American Boat & Yacht Council, "Surveying a Boat". https://abycinc.org/recreational-boaters/surveying-a-boat/ (opened 16 Nov 2026; site © 2026 ABYC).
- U.S. Coast Guard Boating Safety Division, A Boater's Guide to the Federal Requirements for Recreational Boats, revised November 2023. https://uscgboating.org/assets/1/AssetManager/Boaters-Guide-to-Federal-Requirements-for-Receational-Boats-20231108.pdf (opened 16 Nov 2026).
- BoatUS, Boat Evaluation Checklist. https://www.boatus.com/app/views/201805/checklist.asp (opened 16 Nov 2026).