Yanmar's schedule for the 8LV320, 8LV350 and 8LV370 (and Z versions) runs on hours or calendar time, whichever comes first, and Yanmar calls it a general guideline that varies with use, load, fuel and oil. Every day: visual check of the engine, fuel level, engine and marine gear oil level, coolant level, seawater flow at the outlet while running, alarms and indicators, and leaks after starting.
After the first 50 hours: replace engine oil and filter and marine gear oil and filter (if fitted), drain the fuel tank, and have a dealer check propeller shaft alignment. Every 50 hours or monthly: drain the fuel filter/water separator and check battery electrolyte. Every 250 hours or a year: replace engine oil and oil filter, marine gear oil and filter, the fuel filter element and the zinc anode; drain the fuel tank; check the seawater pump impeller; clean the air filter and the exhaust/water mixing elbow; check belts and wiring connectors; and have a dealer wash the turbocharger blower. Replace the coolant every year.
Every 500 hours or 2 years: clean or replace the mixing elbow and replace rubber fuel and water hoses. Every 750 hours or 4 years: replace the seawater pump impeller, and have a dealer clean the seawater passages, replace the turbocharger lagging and check shaft alignment.
At a glance
| Interval (whichever first) | Items (dealer items marked) |
|---|---|
| Daily | Visual check, fuel level, engine and gear oil level, coolant level, seawater outlet flow, alarms, leaks after starting |
| First 50 h | Engine oil and filter, gear oil and filter, drain fuel tank, shaft alignment (dealer) |
| 50 h or monthly | Drain fuel filter/water separator, battery electrolyte |
| 250 h or 1 year | Engine oil and filter, gear oil and filter, fuel filter element, zinc anode, drain fuel tank, check impeller, clean air filter, clean mixing elbow, belts, wiring, wash turbo blower (dealer) |
| Every year | Replace coolant |
| 500 h or 2 years | Clean or replace mixing elbow, replace rubber fuel and water hoses |
| 750 h or 4 years | Replace impeller; clean seawater passages, turbo lagging, shaft alignment (dealer) |
Source: Yanmar Co., Ltd., Operation Manual, Marine Propulsion Engine 8LV320, 8LV350, 8LV370, 8LV320Z, 8LV350Z, 8LV370Z, code 0A8LV-EN0012, "Periodic Maintenance Schedule", pp. 45 to 46 (PDF dated January 2017). Copy opened 15 Nov 2026 at https://www.navela.hr/site_media/media/uploads/engines/documents/OM_8LV_0A8LV-EN0012_4.pdf (third-party host). Yanmar's product page, https://www.yanmar.com/marine/product/engines/8lv370/, should list an Operation Manual download (search results say so, but the site blocked my automated access, so this is UNKNOWN). Check the edition in a browser.
Ask the Concierge: How often should I service my Yanmar 8LV?