Cummins' marine schedule for the QSM11 runs on hours or calendar time, whichever comes first, and most items fall due once a year for a typical owner. Zinc anodes: replace every 250 hours or 6 months. Every 250 hours or a year: check the drive belts and replace the spin-on fuel filter.
Oil and oil filter: Cummins' notes say every 250 hours or a year, and its chart allows up to 500 hours if you run only ultra-low-sulfur diesel (ULSD). Every 1,500 hours or a year: clean the air cleaner, replace the seawater pump impeller, change the fuel-water separator and coolant filter, check SCA and antifreeze concentration, inspect the heat exchanger pressure cap, check the turbocharger, and check the seawater hoses, battery cables and wiring harness.
Seawater aftercooler: inspect every 1,500 hours or 3 years. Overhead set: every 1,500 hours on recreational ratings, up to 5,000 hours on commercial. Crankcase breather element: every 6,000 hours or 4 years on recreational engines (1,500 hours or a year on commercial). Viscous vibration damper: check every 6,000 hours or 4 years.
At a glance
| Item | Action | Interval (whichever first) |
|---|---|---|
| Zinc anodes | Replace | 250 h or 6 months |
| Drive belts | Check | 250 h or 1 year |
| Spin-on fuel filter | Replace | 250 h or 1 year |
| Oil and filter | Drain and replace | 250 h or 1 year; up to 500 h on ULSD only |
| Air cleaner | Clean | 1,500 h or 1 year |
| Seawater pump impeller | Replace | 1,500 h or 1 year |
| Fuel-water separator | Change | 1,500 h or 1 year |
| Coolant filter | Change | 1,500 h or 1 year |
| SCA and antifreeze concentration | Check | 1,500 h or 1 year |
| Heat exchanger pressure cap | Inspect for reuse | 1,500 h or 1 year |
| Turbocharger | Check | 1,500 h or 1 year |
| Seawater hoses, battery cables, wiring | Check | 1,500 h or 1 year |
| Aftercooler (seawater) | Inspect for reuse | 1,500 h or 3 years |
| Overhead set | Adjust | 1,500 h (recreational); up to 5,000 h (commercial) |
| Crankcase breather element | Replace | 6,000 h or 4 years (recreational); 1,500 h or 1 year (commercial) |
| Viscous vibration damper | Check | 6,000 h or 4 years |
Source: Cummins Inc., Bulletin 5410779 (same as B1). https://mart.cummins.com/imagelibrary/data/assetfiles/0032370.pdf (opened 15 Nov 2026).
Ask the Concierge: How often should I service my Cummins QSM11?