Caterpillar sets C18 marine intervals by fuel burned, service hours or calendar time, whichever comes first, and notes that silt, sediment, algae, salt and intermittent use all shorten some intervals. Every day: check the CCV filter and air cleaner service indicators, oil and coolant level, drain the primary fuel filter/water separator, and do a walk-around. At the first 20 to 40 hours, inspect and adjust the belts. Every 50 hours or weekly: inspect and clean the aftercooler condensate drain valve and sea water strainer, and inspect or replace the zinc rods.
At the first 250 hours (or 14,400 L / 3,750 US gal of fuel): inspect and adjust valve lash and fuel injectors. Then every 250 hours, 14,400 L of fuel, or a year: change engine oil and filter and take an oil sample; replace the primary (water separator) and secondary fuel filters; inspect the rubber auxiliary water pump impeller, belts, hoses and clamps; clean or replace the air cleaner element and clean the crankcase breather; test and add SCA; drain fuel tank water and sediment; check battery electrolyte. With a deep sump, the oil and filter change moves to every 500 hours, 28,500 L of fuel, or a year.
Every 1,000 hours (57,000 L of fuel): clean and test the aftercooler core, replace the CCV fumes disposal filter, inspect the heat exchanger and turbocharger. Every 3,000 hours (170,400 L): change DEAC coolant, replace the water temperature regulator, inspect valve lash, rotators and injectors, the bronze impeller, damper, mounts, speed/timing sensor and starting motor. Every 5,000 hours: inspect the alternator and water pump, check the oil cooler core, and top-end overhaul per Cat's maintenance recommendations. With Cat ELC coolant, add extender at 6,000 hours or 3 years and change it at 12,000 hours or 6 years. Coolant samples: Level 1 every 500 hours, Level 2 every year.
At a glance
| Interval (whichever first) | Main items |
|---|---|
| Daily | Service indicators, oil and coolant level, drain primary fuel filter, walk-around |
| First 20 to 40 h | Belts |
| 50 h or weekly | Aftercooler condensate drain valve, sea water strainer, zinc rods |
| First 250 h | Valve lash, fuel injectors |
| 250 h / 14,400 L fuel / 1 year | Oil and filter plus sample, both fuel filters, rubber impeller, belts, hoses, air cleaner, crankcase breather, SCA, fuel tank water, battery |
| 500 h / 28,500 L / 1 year | Oil and filter, deep sump engines only |
| 500 h | Coolant sample, Level 1 |
| Yearly | Coolant sample, Level 2 |
| 1,000 h / 57,000 L | Aftercooler core, CCV fumes disposal filter, heat exchanger, turbocharger |
| 3,000 h / 170,400 L | DEAC coolant, thermostat, valve lash, rotators, injectors, bronze impeller, damper, mounts, speed/timing sensor, starter |
| 5,000 h / 284,000 L | Alternator, water pump, oil cooler core, top-end overhaul |
| ELC coolant | Extender 6,000 h / 3 years; change 12,000 h / 6 years |
| 10,000 h / 570,000 L | Major overhaul (per maintenance recommendations) |
Source: Caterpillar, "C18 Marine Engine, Maintenance Intervals", excerpted from Operation & Maintenance Manual SEBU7689-10, ©2009 Caterpillar, pp. 81 to 82. Copy opened 15 Nov 2026 at https://www.jimmyrogersyachtbroker.com/wp-content/uploads/2015/02/CAT-C-18-Marine-Maintenance-Schedule.pdf (third-party host). Note: that broker's own web summary says "1000 Hours, 4 Years"; Cat's schedule says 1,000 hours with no year limit, and this page follows Cat.
Ask the Concierge: What are the service intervals for my Cat C18?